The MX25L3206E feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus.
Part number : MX25L3206E
Functions : 32M-BIT [x 1 / x 2] CMOS SERIAL FLASH
Package : 16-Pin SOP, 8-Pin SOP, 8Pin PDIP
Manufacturer : Macronix International
Image :
Description
:
The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access to the device is enabled by CS# input. When it is in Dual Output read mode, the SI and SO pins become SIO0 and SIO1 pins for data output.
PERFORMANCE
• High Performance
– Fast access time: 86MHz serial clock
– Serial clock of Dual Output mode : 80MHz
– Fast program time: 1.4ms(typ.) and 5ms(max.)/page
– Byte program time: 9us (typical)
– Fast erase time: 60ms(typ.) /sector ; 0.7s(typ.) /block
• Low Power Consumption
– Low active read current: 25mA(max.) at 86MHz
– Low active programming current: 20mA (max.)
– Low active erase current: 20mA (max.)
– Standby current: 40uA (max.)
– Deep power-down mode 5uA (typical)
• Typical 100,000 erase/program cycles
• 20 years of data retention
Pinout
Features
1. Single Power Supply Operation
– 2.7 to 3.6 volt for read, erase, and program operations
2. Serial Peripheral Interface compatible — Mode 0 and Mode 3
3. 33,554,432 x 1 bit structure or 16,777,216 x 2 bits (Dual Output mode) structure
4. 1024 Equal Sectors with 4K byte each
– Any Sector can be erased individually
5. 64 Equal Blocks with 64K byte each
– Any Block can be erased individually
6. Program Capability
– Byte base
– Page base (256 bytes)
7. Latch-up protected to 100mA from -1V to Vcc +1V
Official Homepage : http://www.macronix.com/MX25L3206E
Reference Site : https://groups.google.com/forum/#!topic/nottinghack/LJbULwPAa1A
MX25L3206E Datasheet PDF Download
Other data sheets within the file : MX25L3206EMI-12G, MX25L3206EPI-12G, MX25L3206EZNI-12G
