HY-JKM5 – 5-Axis Interface Board Manual

Part number : HY-JKM5

Functions : 5-Axis Interface Board

Package information : Board

Image ( placa hy-jkm5 )

placa-hy-jkm5-5axis-board


Product Information

The HY-JKM5 controller is made with the possibility of mounting the body and connecting pads quick way. That simplifies installation, maintenance and replacement in case of failure of the soma as a board and connected thereto drivers.

Features

1. The maximum matching 5-axis stepper motor driver
2. The two-stage signal processing, signal transmission smooth, powerful anti-jamming
3. 5 input interface to define the emergency stop, limit, points in the knife, etc.
4. relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc
5. five-axis job LED display, visual display products, working

 

Pinout :

hy-jkm5-datasheet-pinout

1. Parallel port LPT (D-Sub 25)
2. 5V DC USB power connector
3. Terminal block axis A
4.
Terminal block axis Z
5. Terminal block axis Y
6. Terminal block axis X
7. Terminal block axis A
8. The port to connect an external joystick (D-Sub 15)
9. Terminal block relay connection load
10. Terminal block to connect limit switches to the X axis
11. Terminal block to connect limit switches to the Y axis
12. Terminal block to connect limit switches to the Z axis
13. Terminal block to connect limit switches to the A axis
14. Terminal block connection button E-Stop (Emergency Stop)
15. Connecting an external 5V power supply
16. Power switch (USB ⇔ BP)
17. Connector to connect the LED display at the 3 position
18. Connector to connect the LED display on the 4 position
19. Connector to connect the LED display on the 4 position
20. Relay

 

Reference site

1. http://www.cnc-club.ru/forum/viewtopic.php?f=41&t=5555

2. http://totcnc.com/tblog/22_instruction-breackout-board-bb5002-5axis#010

 

HY-JKM5 Datasheet PDF

HY-JKM5 pdf  DXB-54 pdf



This entry was posted in Uncategorized. Bookmark the permalink.