WS2801 – 3-Channel Constant Current LED Driver

WS2801 Information is available here.

Part Number : WS2801

Function : This is a kind of semiconductor, 3-Channel Constant Current LED Driver.

Pinouts :

Package :

Manufacturer : Worldsemi

Image :

WS2801 データシート

Some text files in PDF file :

Preliminary WS2801 3-Channel C onstant Current LED Driver With Programmable PWM Outputs  


  Applications • Supports both constant voltage and constant current drive mode • Programmable constant LED drive current • Wide constant output current range 5~150mA • Build in PWM dimming scheme for each output channel, supports free-run, especially suitable for low cost controller application • PWM free-run capability(refresh rate(2.5KHz) • Build in buffers to cascading data and clock to the next driver • Output polarity reverse function • Support hot swap • Maximum input clock frequency 25MHz • Power supply voltage 3.3~5.5V • LED decorative lighting • Indoor/Outdoor LED video or massage display • PWM signal generator • LCD TV back lighting   General


The WS2801 is a constant current LED driver. It is designed for indoor/ outdoor LED displays and decorative LED lighting system. It is suitable for LED cascading applications. The WS2801ownes 3 output channels, each channel can drive a constant current up to 30mA. WS2081 contains serial shift registers, data latches, output registers, band gap reference voltage generator, internal oscillator, and programmable constant output current drivers. The serial data is read into the shift registers at the rise edge of the external clock. The data and clock output buffers are designed for cascading another chip. The output polarity reverse function is designed for driving high power LED by adapting the application circuitry. The WS2801 adopts the reliable 2-wire scheme, which features low EMI transport, very strong anti-interference ability, and support hot-swap. The 2-wire control scheme can reduce the system cost; it is very suitable for low cost LED decorative LED lighting systems. WS2801 is available in both SOP-14 and DIP-14 packages, the operating temperature is -40~85℃     Pin Configurations   Typical Application Circuit Fig1.a SOP-14 package   Fig1.b DIP-14 [ … ]

WS2801 PDF File

This entry was posted in Uncategorized. Bookmark the permalink.