SY8105 データシート ( PDF ) – Synchronous Step Down Regulator

SY8105 データシート に関する情報がここにあります。

部品番号 : SY8105

機能 : これは一種の半導体です。, Synchronous Step Down Regulator.

ピン配列 :

パッケージ :

メーカー : Silergy

画像 :

SY8105 データシート

PDFファイル内のいくつかのテキストファイル :

Applications Note:AN_SY8105 High Efficiency, 500kHz, 5A, 18V Input Synchronous Step Down Regulator General

Description

The SY8105 is a high efficiency 500 kHz synchronous step-down DC-DC converter capable of delivering 5.0A current. The SY8105 operates over a wide input voltage range from 4.5V to 18V and integrates main switch and synchronous switch with very low RDS(ON) to minimize the conduction loss. Low output voltage ripple and small external inductor and capacitor sizes are achieved with 500 kHz switching frequency. It adopts the instant PWM architecture to achieve fast transient responses for high step down applications Ordering Information SY8105 □(□□)□ Temperature Code Package Code Optional Spec Code Ordering Number Package type Note SY8105ADC TSOT23-6 —

Features

• low RDS(ON) for internal switches (top/bottom): 40mΩ/26mΩ • 4.5-18V input voltage range • 5.0A output current capability • 500 kHz switching frequency • Instant PWM architecture to achieve fast transient responses. • Internal softstart limits the inrush current • Cycle-by-cycle peak current limitation • 1.5% 0.6V reference • TSOT23-6 package Applications • Set Top Box • Portable TV • Access Point Router • DSL Modem • LCD TV Typical Applications Figure 1. Schematic Diagram Efficiency (%) 100 90 80 70 60 50 40 30 20 10 0 0.001 Efficiency vs. Load Current VIN=5V,VOUT=3.3V VIN=12V,VOUT=3.3V VIN=16V,VOUT=3.3V 0.01 0.1 1 Load Current (A) 10 Figure 2. Schematic Diagram AN_SY8105 Rev. 0.9 Silergy Corp. Confidential- Prepared for Customer Use Only 1 Pinout (top view) AN_SY8105 FB BS EN LX GND IN TSOT23-6(FC) Top Mark: NYxyz, (Device code: NY, x=year code, y=week code, z= lot number code) Pin Name FB EN GND IN LX BS Pin Number 1 2 3 4 5 6 Pin

Description

Output Feedback Pin. Connect this pin to the center point of the output resistor divider (as shown in Figure 1) to program the output voltage: Vout=0.6*(1+R1/R2) Enable control. Pull [ … ]

SY8105 PDF File



This entry was posted in Uncategorized. Bookmark the permalink.