ST7565R – 65 x 132 Dot Matrix LCD Controller/Driver

ST7565R Datasheet PDF learn more.

Part number : ST7565R

Functions : This is a kind of semiconductor. 65 x 132 Dot Matrix LCD Controller/Driver.

Pin arrangement :

Package information :

Manufacturer : Sitronix

Image :

ST7565R Datasheet PDF

The texts in the PDF file :

ST Sitronix ST7565R 65 x 132 Dot Matrix LCD Controller/Driver

Features

l l l Directly display RAM data through Display Data RAM. RAM capacity : 65 x 132 = 8580 bits Display duty selectable by select pin 1/65 duty : 65 common x 132 segment 1/49 duty : 49 common x 132 segment 1/33 duty : 33 common x 132 segment 1/55 duty : 55 common x 132 segment 1/53 duty : 53 common x 132 segment High-speed 8-bit MPU interface: ST7565R can be connected directly to both the 80×86 series MPUs and the 6800 series MPUs. Serial interface (SPI-4) is also supported. Abundant command functions Display data Read/Write, display ON/OFF, Normal/ Reverse display mode, page address set, display start line set, column address set, status read, display all points ON/OFF, LCD bias set, electronic volume, read/modify/write, segment driver direction selects, power saver, static indicator, common output status select, V0 voltage regulation internal resistor ratio set. Static drive circuit equipped internally for indicators. (1 system, with variable flashing speed.) Embedded analog power supply circuits for Liquid Crystal driving: Booster, Regulator and Follower. Embedded Booster circuit: l l l l 2X,3X,4X,5X and 6X boost ratios are supported. Independent input (VDD2) for boost reference voltage. High-accuracy Regulator circuit: Build-in Electronic volume function for the contrast control. Thermal gradient = –0.05%/°C. Embedded voltage Follower circuit for LCD driving. Embedded R-C oscillator circuit. The external clock is also supported. Extremely low power consumption: 60uA, bare dice (using the internal power). Settings: VDD – VSS = VDD2 – VSS =3.0 V, Booster Ratio=4, V0 – VSS = 11.0 V. Display OFF and the normal mode is selected. Logic power supply : VDD – VSS = 1.8V to 3.3 V Analog Power (Boost reference voltage): VDD2 – VSS = 2.4V to 3.3V Booster maximum voltage limited VOUT= 13.5V Liquid crystal drive power supply: V0 – VSS = 3.0V to 12.0 V Wide range of operat [ … ]

ST7565R PDF File



This entry was posted in Uncategorized. Bookmark the permalink.