R5478N187CD – Li-ION/POLYMER 1CELL PROTECTOR

R5478N187CD Datasheet PDF learn more.

Part number : R5478N187CD

Functions : This is a kind of semiconductor, Li-ION/POLYMER 1CELL PROTECTOR.

Pin arrangement :

Package information :

Manufacturer : RICOH

Image :

R5478N187CD Datasheet PDF

The texts in the PDF file :

Li-ION/POLYMER 1CELL PROTECTOR R5475N/R5478N SERIES No. EA-291-121009 OUTLINE The R5475N/R5478Nxxxxx Series are high voltage CMOS-based protection ICs for over-charge/discharge of rechargeable one-cell Lithium-ion (Li+) / Lithium polymer excess load current, further include a short circuit protector for preventing large external short circuit current and Excess discharge-current. Each of these ICs is composed of three voltage detectors, a reference unit, a delay circuit, a short circuit protector, an oscillator, a counter, and a logic circuit. When the over-charge voltage crosses the detector threshold from a low value to a high value, the output of COUT pin switches to low level after internal fixed delay time. The conditions to release over-charge detector are different by mask options. In terms of so called “Latch function” version, after detecting over-charge, the detector can be reset and the output of COUT becomes “H” when a kind of load is connected to VDD after a charger is disconnected from the battery pack, and the cell voltage becomes lower than over-charge detector threshold. If a charger is continue to be connected to the battery pack, even the cell voltage becomes lower than over-charge detector threshold, over-charge state is not released. On the other hand, in terms of so called, “ Released by voltage level” version, after detecting over-charge, when the cell voltage reaches the released voltage from over-charge, the output of COUT becomes “H” The output of DOUT pin, the output of Over-discharge detector and Excess discharge-current detector, switches to “L” level after internally fixed delay time, when discharged voltage crosses the detector threshold from a high value to a value lower than VDET2. The conditions to release over-discharge detector are also different by mask options. In terms of so called “Latch function” version, after detecting over-discharge voltage, connect a charger to the battery pack, and when the battery [ … ]

R5478N187CD PDF File



This entry was posted in Uncategorized. Bookmark the permalink.