MT29F256G08AUCAB – NAND Flash Memory

MT29F256G08AUCAB Datasheet PDF learn more.

Part number : MT29F256G08AUCAB

Functions : This is a kind of semiconductor, NAND Flash Memory.

Pin arrangement :

Package information :

Manufacturer : Micron

Image :

MT29F256G08AUCAB Datasheet PDF

The texts in the PDF file :

Micron Confidential and Proprietary 32Gb, 64Gb, 128Gb, 256Gb Asynchronous/Synchronous NAND

Features

NAND Flash Memory MT29F32G08ABAAA, MT29F64G08AFAAA, MT29F128G08A[J/K/M]AAA MT29F256G08AUAAA, MT29F32G08ABCAB, MT29F64G08AECAB MT29F128G08A[K/M]CAB, MT29F256G08AUCAB

Features

• Open NAND Flash Interface (ONFI) 2.2-compliant1 • Single-level cell (SLC) technology • Organization – Page size x8: 8640 bytes (8192 + 448 bytes) – Block size: 128 pages (1024K + 56K bytes) – Plane size: 2 planes x 2048 blocks per plane – Device size: 32Gb: 4096 blocks; 64Gb: 8192 blocks; 128Gb: 16,384 blocks; 256Gb: 32,786 blocks • Synchronous I/O performance – Up to synchronous timing mode 5 – Clock rate: 10ns (DDR) – Read/write throughput per pin: 200 MT/s • Asynchronous I/O performance – Up to asynchronous timing mode 5 – tRC/tWC: 20ns (MIN) – Read/write throughput per pin: 50 MT/s • Array performance – Read page: 35µs (MAX) – Program page: 350µs (TYP) – Erase block: 1.5ms (TYP) • Operating Voltage Range – VCC: 2.7–3.6V – VCCQ: 1.7–1.95V, 2.7–3.6V • Command set: ONFI NAND Flash Protocol • Advanced Command Set – Program cache – Read cache sequential – Read cache random – One-time programmable (OTP) mode – Multi-plane commands – Multi-LUN operations – Read unique ID – Copyback • First block (block address 00h) is valid when shipped from factory. For minimum required ECC, see Error Management (page 114). • RESET (FFh) required as first command after power-on • Operation status byte provides software method for detecting – Operation completion – Pass/fail condition – Write-protect status • Data strobe (DQS) signals provide a hardware method for synchronizing data DQ in the synchronous interface • Copyback operations supported within the plane from which data is read • Quality and reliability – Data retention: JESD47G compliant; see qualification report – Endurance: 60,000 PROGRAM/ERASE cycles • Oper [ … ]

MT29F256G08AUCAB PDF File



This entry was posted in Uncategorized. Bookmark the permalink.