ADC0804 – CMOS 8-bit A/D Converter – Intersil

Part number : ADC0804, ADC0804LCN, ADC0804LCD

Function : 8-Bit, Microprocessor- Compatible, A/D Converter

Package information : DIP 20 Pin type

Manufacturer : Intersil Corporation ( )



Product Information

The ADC080X, ADC0804 family are CMOS 8-Bit, successive-approximation A/D converters which use a modified potentiometric ladder and are designed to operate with the 8080A control bus via three-state outputs. These converters appear to the processor as memory locations or I/O ports, and hence no interfacing logic is required. The differential analog voltage input has good common- mode-rejection and permits offsetting the analog zero-input-voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.






1. 80C48 and 80C80/85 Bus Compatible – No Interfacing Logic Required
2. Conversion Time < 100μs
3. Easy Interface to Most Microprocessors
4. Will Operate in a “Stand Alone” Mode
5. Differential Analog Voltage Inputs
6. Works with Bandgap Voltage References
7. TTL Compatible Inputs and Outputs
8. On-Chip Clock Generator
9. 0V to 5V Analog Voltage Input Range (Single + 5V Supply)
10. No Zero-Adjust Required


Typical Application Schematic



Official Homepage :


ADC0804 Datasheet PDF


Posted in Uncategorized

GPD6300A PDF – Chip for MP3 player – Generalplus

Part number : GPD6300A, GPD6300A-002B-QL231

Functions : GPD6300A for MP3 player with FM radio function and design of the chip

Package information : LQFP- 48 Type

Manufacturer : Generalplus ( )


GPD6300A image

Functions :

The Generalplus GPD6300A is highly integrated system-on-a chip and targets a cost-effective, high performance micro-controller solution for MP3 player applications.  It embedded 8051 (8-bit CPU) and DSP processor, one 16-bit timers, USB full-speed mini-host and device, SPI master/slave controller, I2C master/slave controller, SD memory interface, Ir interface, programmable I/O ports, 16-bits audio DAC for audio playback, 10 bits ADC for AD key, UART interface, LCD interface (LCD direct drive mode), 32KB OTP, FM receiver, PLL.

By providing a complete set of system peripherals, the Generalplus GPD6300A chip minimizes overall system costs and eliminates the need to configure additional components.  The GPD6300A provides not only the high-speed performance and low cost for a system.

GPD6300A datasheet


1.8051 8-bit CPU with frequency up to 48MHz.
2.24-bit DSP processor with frequency up to 48MHz.
3.5kX8 bits SRAM for data memory.
4.16KX8 bits ROM and 32KX8 bits OTP for 8051 instruction memory.
5.Universal Serial Bus (USB) full-speed mini-host and device interface..
6.One 16-bits timer.
7.One SD memory interface.
8.SPI master/slave interface.
9.I2C master/slave Interface.
10. UART interface.
11. Ir interface.
12. Embedded FM receiver.
13. 26 Programmable general I/O ports (GPIO) with pull-high/low control.
14. 5V to 3.3V and 3.3V to 1.8V Regulator.
15. Low voltage reset.
16. 16-bits stereo audio DAC for audio playback.
17. 10-bits ADC
18. LCD Interface (LCD direct drive mode).
19. FM record function.


Pinout :

GPD6300A pinout

GPD6300A Datasheet PDF PDF Download

AP18T10AGH-HF-3 pdf


Posted in Uncategorized